Guide · Reliability

What Is a Fiber SLA?

A fiber SLA is the contractual section defining what a provider commits to — availability, repair objectives, and often latency, jitter, and packet loss — plus the remedy when they miss. The headline availability percentage is the least informative part. The exclusions, the measurement period, the definition of an outage, and the claim process determine what the commitment is actually worth.

Reading time
8 minutes
Topic
Reliability
Published
August 24, 2026
Written by
Vast Networks

8 min read · Published August 24, 2026 · Vast Networks

What belongs in a real SLA

An availability commitment with a stated measurement period. A repair or response objective, often expressed as mean time to repair. Performance objectives for latency, jitter, and packet loss where the service warrants them. A precise definition of what counts as an outage and when the clock starts. A list of exclusions. And a remedy with a process for claiming it.

If any of those are missing, the document is a description of intent rather than a commitment. The most commonly missing pieces are the claim process and the outage definition, and their absence is not accidental.

Availability percentages, converted to time

Percentages are designed to look similar. Converted into an annual downtime allowance they separate immediately: 99% permits about 3 days 15 hours; 99.5% about 1 day 19 hours; 99.9% about 8 hours 46 minutes; 99.99% about 52 minutes; and 99.999% about 5 minutes 15 seconds.

Then check the measurement period. The same percentage measured monthly and annually are materially different commitments — a monthly window resets the allowance twelve times a year, while an annual window lets one long outage consume everything.

Reading the exclusions, which is where the substance is

Scheduled maintenance is universally excluded and reasonably so; what matters is how much notice is required and whether there is a maintenance window you can plan around. Force majeure is standard. Customer premises, customer equipment, and customer-caused faults are excluded, which is fair — a router you power off is not a provider outage.

The clauses worth scrutinising are third-party access delays, "acts of third parties" drawn broadly enough to cover any fiber cut caused by someone else, and any exclusion for capacity constraints. A generous exclusions section can hollow out an impressive availability figure entirely.

What the remedy is actually worth

Remedies are typically service credits proportional to the outage duration — a percentage of the monthly charge, sometimes capped at one month. They are not compensation for consequential loss, and virtually every telecom agreement explicitly excludes consequential damages.

For an operation where an hour offline costs many times the monthly circuit charge, that is worth understanding plainly: the SLA provides accountability and a financial signal to the provider, not insurance. If the cost of downtime is high, the money is better spent on a diverse second path than on negotiating a stronger credit schedule.

Questions worth asking any provider

How is an outage detected — by your monitoring or by my call? What is the target response time, and is it a target or a commitment? Is maintenance excluded, and how much notice do I get? Are credits applied automatically or must I claim them, and within what window? What is specifically excluded that I should design around?

The answers separate providers far more reliably than the headline number. A provider that answers all six clearly is telling you something about how it operates.

Frequently asked questions

Is 99.99% uptime realistic for a single circuit?

It is achievable, but a single circuit into a single building has an irreducible risk: one fiber cut can exceed the annual allowance in a single event, because repairs take hours rather than minutes. Consistently achieving four nines end to end normally requires diverse paths, not just a strong commitment on one circuit.

What is mean time to repair?

The average time from fault detection to service restoration, usually expressed as an objective rather than a guarantee. Check what it excludes and whether the clock starts at detection or at your report — the difference can be substantial.

Do service credits happen automatically?

Sometimes, but many agreements require the customer to claim within a defined window. If a claim process exists, someone in your organization needs to own it, or the remedy is theoretical.

Can we negotiate an SLA?

On larger commitments, sometimes — particularly response objectives and maintenance notification. Availability percentages tend to be fixed because they reflect the network's actual engineering rather than a commercial preference.

Want a second opinion on your own numbers?

Send the address and what the site actually runs. A California-based engineer will tell you what can be delivered there, what it involves, and where the guidance above does not apply to your situation.

Talk to a Network Specialist

Service availability depends on location, network proximity, capacity, and engineering review. Share an address and we will confirm what can be delivered there.